Fireplace and Fire Pit Burners
Please read disclaimer
Fireplace Burnersdsfsdfsdf
Item#1031 Prefab Burner
- Designed for natural gas
- 1 1/4" tall x 10 1/2" long
- Ash ledge on top to prevent clogging
- 1/2" FIP on both ends for gas pipe connection, and also can be linked together for wider fireplaces
- 1/8" orifice included
- Made of durable cast iron. Our prefab burner is the standard burner found in our basic Log Lighter kits.
Item#1032 Masonry Burner
- Designed for natural gas
- 1 1/2" tall x 4 1/2" wide x 8 1/4" long
- 1/2" FIP located on one end and bottom (comes with 1/2" plug which is used to plug the non-functional hole)
- The heavy-duty cap can be removed for cleaning purposes but MUST remain on the burner during use
- Made of durable cast iron, the Masonry Burner is primarily used in a true masonry fireplace or fire pit but can be used in an approved prefab fireplace as well
- The Masonry burner can either be installed in place of a fire brick located on the floor of the fireplace or be installed to sit directly on the floor of the fireplace.
Note: Log Lighters are intended only to ignite your wood logs or approved starter logs, then must be immediately turned off after wood has ignited. NOT to be used as a heat, fire, or flame source for manufactured gas logs. Only to be used in an approved prefab wood burning fireplace, masonry wood-burning fireplace, or outdoor fire pit.
Octoburner
The Octoburner is a stainless steel burner explicitly designed for outdoor gas firepits. The unique design allows the flame to be distributed in more of a wavy motion, allowing a balanced flame pattern!
48” Stainless Steel
36” Stainless Steel
24” Stainless Steel
Four Spoke Ring Burner
12-inch diameter
18-inch diameter
All gas connections and log lighter components must be installed by a professional technician in accordance with local and/or state building codes. All systems must be pressure-tested and inspected before any finishing work begins around the fireplace. Pipe sealant designed for gas must be used on all threaded connections. The orifice in the burner must be free of all debris before use. Log Lighter Sales, Inc. valves are CSA-certified where applicable. All pipe and fittings meet or exceed ANSI standards. Log Lighter Sales, Inc. assumes no responsibility or liability for loss or damage due to faulty installation, manufacturer defects, or improper use by the end-user. Log Lighter Sales, Inc. is a wholesale distributor of fireplace related products, and all certifications and/or standards certificates are held by the manufacturer of products. MSDS information for caulks, sealants, and glues are available through the manufacturer of those items
Call Us Today!
Find Us
Fireplace and Fire Pit Burners
Please read disclaimer
Fireplace Burners
Item#1031 Prefab Burner
- Designed for natural gas
- 1 1/4" tall x 10 1/2" long
- Ash ledge on top to prevent clogging
- 1/2" FIP on both ends for gas pipe connection, and also can be linked together for wider fireplaces
- 1/8" orifice included
- Made of durable cast iron. Our prefab burner is the standard burner found in our basic Log Lighter kits.
Item#1032 Masonry Burner
- Designed for natural gas
- 1 1/2" tall x 4 1/2" wide x 8 1/4" long
- 1/2" FIP located on one end and bottom (comes with 1/2" plug which is used to plug the non-functional hole)
- The heavy-duty cap can be removed for cleaning purposes but MUST remain on the burner during use
- Made of durable cast iron, the Masonry Burner is primarily used in a true masonry fireplace or fire pit but can be used in an approved prefab fireplace as well
- The Masonry burner can either be installed in place of a fire brick located on the floor of the fireplace or be installed to sit directly on the floor of the fireplace.
Note: Log Lighters are intended only to ignite your wood logs or approved starter logs, then must be immediately turned off after wood has ignited. NOT to be used as a heat, fire, or flame source for manufactured gas logs. Only to be used in an approved prefab wood burning fireplace, masonry wood-burning fireplace, or outdoor fire pit.
Octoburner
The Octoburner is a stainless steel burner explicitly designed for outdoor gas firepits. The unique design allows the flame to be distributed in more of a wavy motion, allowing a balanced flame pattern!
48” Stainless Steel
36” Stainless Steel
24” Stainless Steel
Four Spoke Ring Burner
12-inch diameter
18-inch diameter
All gas connections and log lighter components must be installed by a professional technician in accordance with local and/or state building codes. All systems must be pressure-tested and inspected before any finishing work begins around the fireplace. Pipe sealant designed for gas must be used on all threaded connections. The orifice in the burner must be free of all debris before use. Log Lighter Sales, Inc. valves are CSA-certified where applicable. All pipe and fittings meet or exceed ANSI standards. Log Lighter Sales, Inc. assumes no responsibility or liability for loss or damage due to faulty installation, manufacturer defects, or improper use by the end-user. Log Lighter Sales, Inc. is a wholesale distributor of fireplace related products, and all certifications and/or standards certificates are held by the manufacturer of products. MSDS information for caulks, sealants, and glues are available through the manufacturer of those items